DOKTEK CUT · CUT-O
Pilot / validationOkra Stem Cutter Machine
Okra's tapered pod and irregular stem make it a poor fit for a fixed-blade cutter. DOKTEK has adapted the same vision-guided stem-cutting platform proven on its production eggplant machine to okra, and is running it on DOKTEK's own pilot line.
This machine is built and running on DOKTEK's own pilot line, shown in the video and photo on this page. It is under validation on real product and is not yet released as a standard catalogue machine.
Machine summary
- Status
- Pilot / validation — built and running, not yet a catalogue machine
- Platform
- Same vision and motion engineering as the production eggplant stem cutting machine
- Product
- Okra
- Capacity
- Configured according to application; no figure is published
- Construction
- Stainless-steel, food-grade design principles
Why Okra Needs Its Own Engineering
Okra pods taper from a wide shoulder to a narrow tip, ridge along their length, and vary in curvature and size within the same harvest. A cutting station built around one nominal pod either leaves stem material on the shoulder or cuts into the pod itself on the next one. The same problem the eggplant machine solves — locating the feature to cut on a product that never repeats exactly — applies directly to okra.
DOKTEK's approach carries over unchanged: machine vision locates the stem on each pod before the cut is made, rather than cutting at a fixed position and hoping the product matches it.
What Is Running Today
The okra stem-cutting station is built and running on DOKTEK's pilot line, using the same vision-detection and precision-motion approach demonstrated on the eggplant machine. It is under validation on real product; DOKTEK does not yet publish a capacity, accuracy or throughput figure for it.
What is confirmed today
Confirmed: the okra stem-cutting station is built and running on DOKTEK's own pilot line — the video and photo on this page are real footage, not renders — using the same platform demonstrated on the production eggplant machine.
Not confirmed, and therefore not published: capacity, accuracy, cut quality across a full harvest range, delivery time and price. Each is defined per project and subject to validation on the customer's product before it is released as a standard catalogue machine.
Next step
Send Us Your Product
An engineering review starts with the real product. The more of the following you can send, the more specific the reply.
- 01Okra variety
- 02Pod size range
- 03Current production method
- 04Number of operators
- 05Required pieces per hour
- 06Country
Evidence and status
Status
Built and under validation on real product; not yet released as a production machine.
Listed under: Cutting & trimming
Public evidence
DOKTEK's own pilot-line footage of the okra stem-cutting station running on real product.
CUT-O
Footage of this machine
- The okra stem-cutting station running on real productPilot line footage
Frequently asked questions
Questions before a machine evaluation.
01Is the okra stem cutter machine available to order?
Not yet as a standard catalogue machine. It is built and running on DOKTEK's pilot line and under validation. DOKTEK reviews each enquiry against the customer's product and proposes what can be validated and configured for that line.
02Is this the same machine as the eggplant stem cutting machine?
It runs on the same vision and motion platform, adapted for okra's shape and stem geometry. Whether a line needs a dedicated okra station or a shared configuration is a project decision.
03What accuracy or capacity does it achieve?
No figure is published for a line still in pilot validation. Performance is validated on the customer's own product before any figure is quoted.
04How does the machine remove the stem from okra?
Each pod is detected by machine vision on the conveyor, the cut position at the stem is computed for that pod, and the cutting mechanism executes it in motion — the same vision and motion platform as the eggplant machine, adapted to the smaller, tapered okra pod. The pilot-line footage on this page shows the station running on real okra.
05Is this an okra cutter for home or restaurant use?
No. Hand okra cutters and small choppers exist for kitchens; this is an industrial stem-cutting station for processors handling okra by the tonne, currently in pilot validation.
06What does an okra stem cutting machine cost?
No price is published while the station is in pilot validation. Scope depends on capacity, line integration and the okra sizes the plant receives; a quotation follows an engineering review and a trial on your product.
Next step
Request a technical evaluation for your product.
Send a short video of your current process, product photos and your target output. An engineer reviews them and replies with what can be evaluated for your line, before any quotation is made.